HobbyKing
TURNIGY MACH2 10.5T BRUSHLESS R/C CAR MOTOR W/TIMING ADJUST 3600KV
Weight | 204g |
Diameter of shaft | 3.17mm |
Length of front shaft | 15mm |
Power | 250W+ |
Specifications:, Dimension:, 53mm x 36mm(42.4mm w/Batt-terminal) , 70mm(with shaft), Kv:3600rpm/v, Cells:, 4-7NiMh / 2-3S Lipoly,
Turnigy Mach2 Brushless R/C Car Motor w/timing adjust. This brushless ...5 Reviews
HobbyKing
TURNIGY NANO-TECH 4000MAH 2S 25~50C LIPO PACK
More than just a fancy name. TURNIGY nano-tech lithium polymer batteries are built with an LiCo nano-technology substrate complex greatly improving power transfer making the oxidation/reduction reaction more efficient, this helps electrons pass more freely from anode to cathode with less internal impedance.In short; less voltage sag and a higher discharge rate than a similar density lithium polymer (non nano-tech) battery.For those that love graphs, it means a straighter, longer curve. For pilots it spells stronger throttle punches and unreal straight-up performance. Excellent news for 3D pilots! Unfortunately with other big brands; numbers, ratings and graphs can be fudged. Rest assured, TURNIGY nano-techs are the real deal, delivering unparalleled performance!Spec.Capacity: 4000mAhVoltage: 2S1P / 2 Cell / 7.4VDischarge: 25C Constant / 50C BurstWeight: 233g (including wire, plug & case)Dimensions: 172x49x14mmBalance Plug: JST-XHDischarge Plug: 4mm bullet-connector *The nano-core technology in lithium ion batteries is the application of nanometer conductive additives. 1) The nanometer conductive additives form ultrastrong electron-conducting networks in the electrodes which can increase electronic conductivity. 2) These additives create a superstrong ability for imbibition in the carrier liquid to supply more ion channels. This improves the ability of ion transmission and ion diffusion. Through improving electronic conductivity and ion transmission, the impedance is reduced and the polarization of high rate discharge decreases greatly.Advantages over traditional Lipo batteries;-Power density reaches 7.5 kw/kg.-Less Voltage sag during high rate discharge, giving more power under load.-Internal impedance can reach as low as 1.2mΩ compared to that of 3mΩ of a standard Lipoly.-Greater thermal control, pack usually doesnt exceed 60degC-Thickness swelling during heavy load doesnt exceed 5%, compared to 15% of a normal Lipoly during heavy load.-Higher capacity during heavy discharge. More than 90% at 100% C rate.-Fast,
5 Reviews
HobbyKing
TURNIGY 2627 BRUSHLESS OUTRUNNER 3800KV
Diameter of shaft | 2.3mm |
Length of front shaft | 13mm |
Magnet type | 45SH |
Voltage | 2-3S |
Prop | APC4.1x4.1 |
Thrust | 330g |
Power | 260W |
Dimension:, 27mm x 29mm, 41mm(with shaft), Weight:, 38g (kv3800) (not including connectors), Lamination thickness: .,
2mm Max performance For 300~500g Funjet style airplane.5 Reviews
HobbyKing
ICHARGER 206B 300W 8S BALANCE/CHARGER
Input voltage range | 10~28.0VDC |
Charge current range | 0.05 20.0A |
Discharge current range | 0.05 20.0A |
Maximum discharge power capacity | 20W |
Maximum extern discharge power capacity | 500W @ 25V/20A |
Current drain for balancing | <350mA |
Balance accuracy | <10mV |
NiCd/NiMH battery cell count | 1~17 series |
Pb battery cell count | 1~12 series (2~24V) |
Log Files storage | 16Mbit (36 hours) |
Intelligent temperature control | Yes |
PC Connect | USB port |
Weight | 350g |
Note | Power supply not included. |
Maximum charge power capacity:, 300W @ input voltage > 18V, Lithium (LiPo/LiIo/LiFe) battery cell count:, 1~6 series (In non-balance mode, expand LiFe to 8s), Battery setup memories:10, Dimensions (L X W X D):, 134 x 83 x 25mm (5.28 x 3.27 x 0.98in),
Capable of handling up to 300W or 20A charge rates. ...5 Reviews
HobbyKing
KD 600XL 1100KV BRUSHLESS HELI OUTRUNNER / 1600W
Dimensions (diameter. x lenght) | 43.0mmX66mm |
Shaft (diameter. x lenght) | 5.0mmX25mm |
Weight with cables | 300g |
Av. Current | 55A |
Peak Power | 1600W |
Kv: 1100rpm/V, Battery: 6S,
Upgrade your 600 size helicopter today!3 Reviews
HobbyKing
EDF DUCTED FAN UNIT 7BLADE 2.5INCH 64MM
Blade Diameter | 64mm / 2.5inch |
Recomended Motor | 24-45 6Turn |
Rpm | 3,750kv |
Power | 400~1500g Thrust |
Blade Type: 7, Shaft Size: 3, ESC: 25,
EDF Ducted Fan Unit 7Blade 2.5inch 64mm mm Made from ...5 Reviews
HobbyKing
MYSTERY 12A BRUSHLESS SPEED CONTROLLER (BLUE SERIES)
Amp rating | 12A |
(10sec) | 16A |
BEC Output | 5.0V / 1A |
Dimensions | 22x21x4mm |
PWM frequency | 8Khz/16Khz |
This ESC is also sold as | HobbyKing BlueSeries. |
Voltage:, 7.4-11.1V (2-3 cell Lipo/5-10 NiCd), Weight:8g, Main Functions:, Safety mode:, the motor wont start no matter what the position of the control stick is when switch on the RC unit., Brake setting:, On/Off (factory default is off), Low current protection:, Ignore/Reduce power/Shut off, Temperature protection:, Reduce power when temperature reaches 120C,
Spec. Burst Rate Three point battery type and low voltage ...5 Reviews
HobbyKing
TURNIGY 2836 BRUSHLESS 450-SIZE HELI MOTOR 3700KV
Bolt holes | 15mm & 19mm |
Diameter of shaft | F3.17mm |
Length of front shaft | F14mm |
Magnet type | 45SH |
Voltage | 3-4S |
Current | 30A |
Power | 700W |
Dimension:, 28mm x 38mm, 53mm(with shaft), Weight:, 70g (kv3700) (not including connectors), Bolt thread:M3, Lamination thickness: ., Max performance:, Prop:**, Included Accessories:, 1 x 13t and 1 x 11t pinion,
2mm For 450 size Helicopter 3 x Male and 3 ...5 Reviews
HobbyKing
HK2627 EDF OUTRUNNER 4300KV FOR 64MM
Specs | Kv- |
Dimensions | 46 x 26mm |
Shaft diameter | 3.0mm |
Shaft length | 10mm |
Voltage | 11.1V |
Weight | 52g (1.83oz.) |
Output Power | 280w |
Max current(<60s) | 36A |
RPM/V | 4300 |
Thrust | 700g(24.7oz.) |
Recommended model weight | 400-750g |
Recommended model fans | 64mm Fans |
Mounting Hole Bolt Circle | 18mm |
Mtg. Hole Number & Size | 4 x M2 |
5 Reviews
HobbyKing
TURNIGY 3639 BRUSHLESS MOTOR 750KV
Diameter of shaft | 5mm |
Length of front shaft | 18.8mm |
Magnet type | 45SH |
Voltage | 2-3S |
Max current | 30~35A |
Prop | 12x8~14x10 |
Thrust | 1800~2000g |
Power | 600W |
Download data files | TURNIGY MOTOR DATA |
Dimension:, 37mm x 42mm, 62mm(with shaft), Weight:, 136g (kv750) (not including connectors), Lamination thickness: .,
2mm Max performance For 1500~2000g 3D model airplane.5 Reviews
HobbyKing
EDF70 WITH 3800KV MOTOR ASSEMBLED
Motor | C20pro 3800kv |
Current | 29.6A |
Thrust | 24.8oz |
Power | 296W |
Current | 34A |
Thrust | 28.9oz |
Power | 377.4W |
Current | 39A |
Thrust | 33.3oz |
Power | 491.4W |
5 Reviews
HobbyKing
FRSKY V8R7-II 2.4GHZ 7CH RECEIVER
Operating voltage | 3.0~16V |
Power consumption | 30mA |
Resolution | 3072 |
Latency | 22ms |
Range | 1.5km-2.5km |
Dimensions | 33.5 x 22 x 12 mm |
Weight | 5.5g |
Features:, Advanced Continuous Channel Shifting Technology (ACCSTis our advanced tecnology it shifts channel hundred times per second and there is no signal conflicts and interruptions) robust frequency agility., Receiver Specification:, Number of channels: 7,
FrSKY ACCST technology is proven, approved by many model associations, ...5 Reviews
HobbyKing
MIRAGE 4000 FIGHTER W/ BRUSHLESS EDF & RETRACTS PLUG-N-FLY
Highly scaled aerobatic fighter jet EDF Plug-n-fly.The Mirage-4000 EDF jet comes 97% pre-built and includes a powerful 45A brushless EDF system and retractable landing gear. Specification: Wingspan: 785mm Length: 1230mm Height: 345mm Flying Weight: 940g Channel: 6ch Motor: 2600kv Brushless Outrunner ESC: 45A Servo: 7 x 9g EDF: 70mm Required: Your own Tx & Rx Battery 2200mah 14.8V 4S 20C,
5 Reviews
HobbyKing
GENUINE IMAX B8PLUS CHARGER/DISCHARGER 1-8 CELLS
Operating voltage range | 10.0~18.0Volt |
Circuit power | max. 150W |
Charge current range | 0.1~7.0A |
Discharge current range | 0.1~5.0A |
Current drain for balancing Li-Po | 300mAh/cell |
NiCd/NiMH battery cell count | 1~27 cells |
Lithium bettery cell count | 1~8 Series |
Pb battery voltage | 2 to 36V |
Weight | 480g |
Dimensions | 163.8X106.2X45.6mm |
USB | Yes |
Temp Prop port | Yes |
5 Reviews
HobbyKing
TURNIGY2836 BRUSHLESS OUTRUNNER 1000KV
Diameter of shaft | 4mm |
Length of front shaft | 14mm |
Magnet type | 45SH |
Prop | EP10x5 |
Thrust | 1000g |
Power | 300W |
Dimension:, 28mm x 37mm, 55mm(with shaft), Weight:, 80g (kv1000) (not including connectors), Lamination thickness: ., Voltage:3S,
2mm Max performance For 800-1000g 3D 1200g+ Trainer5 Reviews